Our unique powerful automatic cleaning mechanism removes any dust that has accumulated on the filter, so that it never gets clogged and continuous operation is possible.
To remove dust attached to our characteristic pleated filters, a supersonic impulse (impact wave) generated by the expulsion of compressed air is applied to the filter to powerfully remove any dust that has accumulated.
Compressed air is blown into the bags and the internal pressure stretches out the creases and blows off any accumulated particles.
With this process there is a risk of scratching, the filter holes opening up or the bag falling.
In general bag filter dust collectors, the power to remove accumulated particles is weak and the filter often becomes clogged. Repeatedly removing the particles when it is already clogged increases the risk of damage.
Unlike the general bag filters, the powerful automatic cleaning method our dust collectors use enables longer filter life.
In order to withstand the powerful automatic cleaning process, all parts except the filter are made of metal. The upper and lower extremes are firmly attached using metal parts, eliminating the problems of breakage and splitting which can occur with resin filters from other companies.
This enables our pleated filters to last longer.
Filter life is 30,000 hours!
Replacement need only be once every four years, or possibly longer.
*This can differ depending upon the characteristics of the particles and the filter's usage
*The general guideline for filter replacement on equipment rented out for tunnel construction is every 10 years.
![Custom-made dust collectors to meet your needs [Industrial Use Dust Collectors] I Series](../../img/dust/bnr_img_01_off.jpg)
Copyright ©RYUKI Engineering. All Rights Reserved.